Home
About Us
Washing Machines
Deriveting Machines
Blaster Machines
Paint System
BMS Paint
Riveter Machine
BMS Rivets
Contact Us



BMS Washing Machines

BMS Washers use no chemicals and produce no liquid waste. They safely and efficiently clean 1,000 brake shoes per shift and eliminate the need to scrape grease off the shoes.

We manufacture our machines using only the highest quality materials. Our brake shoe washers weigh 7500 pounds and are made from 3/8” thick steel to ensure longevity and efficiency. The rotating drum carousel, made from 100% stainless steel to eliminate rust, has 8 divisions – 2 for heating prior to washing, 3 for washing, 2 for drip drying, and 1 for loading and unloading.

We’ve installed 5 large diameter nozzles to enhance performance and reduce clogs. Through each nozzle flows 55 gallons per minute of water at 190-200 degrees F. These machines clean well, last longer than competitive machines, are much easier to work on, as well as less costly to repair.

An added benefit is our programmable clock, which turns the burner on before the workday starts. The machine is heated up and ready to start washing when your employees arrive. It automatically turns itself off at the end of the day, and you can easily override the automatic clock to allow for additional shift scheduling, such as Saturdays or overtime.

BMS washing machines clean themselves automatically during the day. They clean themselves when the burner starts in the morning, once 4 hours later, and again at the end of the day when the burner turns off. Five gallons of sludge is collected for every 500 brake shoes.

Back to top

 

 

Used brake shoes
Washing brake shoes
Cleaned shoes